Remote-processing BASIC for the CX-10 Modbus Manuel d'utilisateur télécharger pdf (Page 50)

BASIC PROGRAMMING GUIDE

2-41

PH0.

PH1.

Syntax: PH0.

expr

PH1.

expr

Where:

expr

= any mathematical expression

Function: Print in hexadecimal format following the number with an "H".

Mode: Command, run

Use: PH0. PEEKB(1,3000)

DESCRIPTION

The PH0. and PH1. instructions work like PRINT instruction except that it print values in HEX. The value

printed is always a truncated integer and is followed with an "H" to indicate hexadecimal format. If

expr

evaluates to a fractional number within integer range,

expr

is truncated and displayed in hex format. If

expr

not within integer range (0 through 0FFFFH/65535), the normal decimal PRINT mode is used. PH0.

suppresses two leading zeros if

expr

evaluates to less than 0FFH. PH1. always prints four hexadecimal digits.

If there is no

expr

, a carriage return - line feed combination (a blank line) will be output. An

expr

may be any

combination of instructions/operators and variables, strings, or literal values. More than one

expr

may be

output by separating them with commas. Values are printed with a leading space; a list of values separated

by commas will thus print with one intervening. This is different from the decimal PRINT instruction which

prints values with a trailing blank. Strings and literals are output with no added blanks. If a comma is the last

character in the list then a carriage return/linefeed is suppressed.

EXAMPLE

100 PH0. A

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 83 84

Pas de commentaire

Remote-processing BASIC for the CX-10 Modbus Manuel d'utilisateur Page 50