Remote-processing BASIC 52 Manuel d'utilisateur télécharger pdf (Page 133)

RPBASIC-52 PROGRAMMING GUIDE

2-114

TIME (command)

Syntax: TIME hours,minutes,seconds

Where: hours = 0 to 23

minutes = 0 to 59

seconds = 0 to 59

Function: Sets the time to the real time clock

Mode: Command, Run

Use: TIME 18,17,00 Sets time to 6:17:00 PM

Cards: All. Note consideration for RPC-320, RPC-330

DESCRIPTION

Time uses a 24 hour format. Hundredths of a second are set to 0 when TIME is executed.

The RPC-320 and RPC-330 use an optional DS1216DM clock module. This module is shipped with the

clock off to conserve battery power. To turn the clock on, execute the DATE com mand first. Failure to do so

causes a HARD WARE error. DA TE need only be done once to turn on the clock. Subsequent change s to

TIME can be performed without using DATE. Refer to your hardware manual for installation location.

TIME (function), DATE (command)

ERRORS

BAD ARGUMENT When hours, minutes, or seconds is out of range

HARDWARE Clock module is missing or not turned on. Error code 50 at address 101H

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 162 163

Pas de commentaire

Remote-processing BASIC 52 Manuel d'utilisateur Page 133