Remote-processing BASIC 52 Manuel d'utilisateur télécharger pdf (Page 141)

RPBASIC-52 PROGRAMMING GUIDE

2-122

CONFIG DISPLAY

Syntax: CONFIG DISPLAY type

Where: type = 0 to 3, defines the display type

0 = LCD 4 x 40 character

1 = LCD 4 x 20 character

2 = Vacuum florescent 4 x 20 character

3 = LCD - 5003 graphics display

4 = Vacuum florescent 4 x 20, IEEE Centry series

Function: Defines the display type used with DISPLAY and related commands.

Mode: Command, RUN

Use: CONFIG DISPLAY 1 Configures display port and operation for LCD 4 x 20.

Cards: All

DESCRIPTION

The display type must be set in order for the DISPLAY drivers to work properly.

Other kinds of LCD and Vacuum florescent displays may also be used. However, certain options such as

character positioning may not work properly or at all.

DISPLAY, CLEAR DISPLAY

ERROR

BAD ARGUMENT When type out of range.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 162 163

Pas de commentaire

Remote-processing BASIC 52 Manuel d'utilisateur Page 141